MX-2000 2-Channel Mixer

Model No.: MX-2000

Key Features :

• Input pain control per channel.
• High level master output, high current phones output.
• Power on/off muting.
• Low sound leakage crossfader.
• Low distortion (0.003%), low noise (S/N=111dB)

[Specificatoins]

1. Power source              
AC 9V, 500mA.

2. Dimensions         
228 (W) x 236 (D) x 81.6 (H) mm

3. Weight                
1.2 Kgs

4. Features

1.       Input pain control per channel.

2.       High level master output, high current phones output.

3.       Power on/off muting.

4.       Low sound leakage crossfader.

5.       Low distortion (0.003%), low noise (S/N=111dB)

5. Input/output impedance & sensitivity (Master 0dBV output, load=100K Ohm. Maximum gain)
Line                                            10K OHM /-14dBV (200mV)                 +/-2dB
Phono                                         47K OHM /-50dBV (3.16mV)                +/-2dB
Mic                                             2.2K OHM /-60dBV (1mV)            +/-2dB
Master                                                1K OHM
Phones (Load=32 ohm)              33 OHM /-2dBV (794mV)                       +/-2dB (Cue selector at CH1+2)

6. Frequency response (Master out, EQ flat)
Line                                            20 - 20K Hz +/-1dB
Phono                                         20 - 20K Hz +1/-2dB (RIAA)
Mic                                             20 - 20K Hz +1/-2dB

7. THD + N (Master 0dBV output, maximum gain, w/20kHz LPF)
Line                                            Less than 0.02% 20-20KHz
Note : 0dBV=1Vrsm

8. Maximum input (1KHz, master out, THD=0.5%, EQ flat, maximum gain)
Line                                            More than +4dBV
Phono                                         More than -32dBV
Mic                                             More than -42dBV

9. Maximum output (Master out, THD=1%, maximum gain, EQ flat)
Master                                                More than +18dBV (8.0V) at load=100K OHM
Phones                                        More than +4dBV (1.6V) at load=32 OHM

10. Output noise (Maximum gain, EQ flat, w/20KHz LPF, A-weighted)
Line                                            Less than -90dBV
Phono                                         Less than -70dBV
Mic                                             Less than -60dBV

11. Crosstalk
Line                                            More than 70dB at 1KHz between L and R
More than 70dB at 1KHz between channels

12. Fader maximum attenuation
Channel fader                             Less than -80dB at 1KHz
Crossfader                                  less than -80dB at 1KHz

13. Channel balance                                Within 3dB

Back