1. APPLTCATION :
This specification applies to the full auto turntable unit FU700.

2. STANDARD TEST CONDITION :
2-1  Ambient Temperature      20 +/- 2 degc
2-2  Relative Humidity         65% +/- 5%
NOTE : If there is no doubt for the measure results , test can be done at 5 degc to 35 degc , and 45% to 85%
Relative humidity.

3. TURNTABLE SECTION :
3-1  Type                             2-speed full-auto
3-2  Motor                             DC Motor (CCM09-120R2-9 or M09S12U13-3)
3-3  Driving Method              Belt drive
3-4  Turntable platter             295mm dia. (Aluminum)
3-5  Speeds                            33 - 1/3 and 45 rpm
3-6  Wow and Flutter              Less than 0.25% ( WTD ) at 3KHz (JIS)
3-7  S/N ratio                          More than 50 dB (DIN - B)
3-8  Speed Tolerance              3000Hz  +3% , -2%
3-9  USB Function                 USB rec. Function
A/D,D/A                        16BIT 44.1KHz or 48KHz USB SELECTABLE
Computer interface       USB 1.1 COMPLIANT WINDOWS XP or MAC OSX

4. TONEARM SECTION :
4-1  Type                              Dynamic balanced straight shaped arm w/soft damping control
4-2  Effective Arm Length   195mm
4-3  Tonearm Lead - in point                                                                                                                           
4-3-1     17cm                    To be operated within the distance 85 +/- 0.75mm from the record center
(count from 5-25 by test record GES –3327 & HT-5)
4-3-2     30cm                    To be operated within the distance 147.3 +/- 0.75mm from the record center
(count from 5-25 by test record GES-3327 & HT-5)
4-4  Tonearm return point    To be operated between the distance of 54mm and 62mm from the record center
(count from 6-15 by test record HP-4005 ,3-15 by EM-1001)
4-5  Tracking Force              3.5 + / - 1.0g

5. CARTRIDGE SECTION :
5-1  Type                              Moving magnet cartridge (AT3600LAX)
5-2  Stylus                            Diamond stylus
5-3  Output Voltage              A. Connect with Equalizer
90-216mV at 1KHz  5cm/sec ( HP-4005 )
B. Connect without Equalizer
1.5-3.6mV at 1KHz  5cm/sec ( HP-4005 )
5-4  Frequency Response     As per attached drawing
5-5  Channel Separation       More than 15dB at 1KHz
5-6  Channel Balance           Within 2.5 dB at 1KHz
5-7  Load Impedence           47K ohm , 100 PF

6. GENERAL SECTION :
6-1 Power Supply                          AC 120V, 60Hz
6-2 Power Consumption                3 W
6-3 Operating voltage                     DC 12V
6-4 Dimensions                              350(W)x 348(D)x 95.4(H)mm
6-5 Weight                                     2.75 Kg

7. ACCESSORIES SUPPLIED               
Instruction manual x 1,
45 rpm adaptor x 1,
USB cable x 1,
Dust cover x 1,
Platter x1,
Slipmat x 1